MICREWTUBE CRYOGENIX
VIALS (NO ATTACHMENT LOOP)
Similar to the T332 Seies but without the “tethered”feature.
The cap do not have the attachment loops. Caps are molded with a deep
internal lip that fits snugly against the interior wall of the tube
thus preventing the contents from coming in contact with the seal
or threads.
Tubes and screw caps are made of polypropylene and can withstand high
speed centrifugation up to 14 000g. Tubes can be autoclaved to 121°C
in upright position with caps loosened. The O-Ring secured in the
top of the cap ensures a positive leakproof seal, time after time,
keeping the integrity of small samples under even the most adverse
conditions. This series of tubes is available either plain or with
printed graduations and white marking area for sample identification.
A Simport MICREWTUBE® will withstand temperatures from -196°C
to +121°C but should not be immersed in the liquid phase of liquid
nitrogen. All sterile tubes are gamma irradiated and packaged in tammperproof,
resealable bags to protect remaining tubes from contamination.t Closure
are supplied in natural color. Color coding can be achieved by the
use of T345 Series Colored Capinsert™ placed on top of closures.
This is accomplished without removing the cap. The use of Capinsert™
increases the writing surface on top of the closure. Also, color-coded
caps are available separately under Series T340.
BACK TO PLASTIC
LABWARE
Copyright ©2000-2003
ALL RIGHTS RESERVED |
|
Difftote 10